Current turnaround time for Custom DTF transfers is 1-2 days.

Rainbow Coral Glitter HTV


Cut Settings:


Blade: Standard
Setting: Iron-on+

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Brother Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Application Instructions:

Application instructions (home iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft Paper or Teflon Sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 15-20 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier warm
Application Instructions (heat press)

  • Cover design with Kraft Paper or Teflon sheet
  • Preheat garment for 2-3 seconds
  • Apply design at 320F/160C
  • Use medium pressure for 15-20 seconds
  • Peel carrier warm

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Scroll to Top